Blog
Visitors, Clipper and tap-to-pay
How a visitor pays on Muni, BART and other Bay Area agencies in 2026: Clipper, contactless cards, MuniMobile, passes, the youth rule and proof of payment.
You step off the plane at San Francisco International Airport with a bag and a question residents never have to ask: how do I pay for the train and the bus? The Bay Area has more than two dozen transit agencies, and until not long ago each had its own way of taking your money. In 2026 the picture is tidier, though not tidy. A regional card called Clipper works on nearly everything, contactless credit and debit cards are accepted on more of it every year, and Muni has its own app and passes for visitors. What follows takes the options in the order a visitor will meet them, with the rules that are stable enough to state. It gives no fares: the Muni fare table is changing, and the SFMTA website lists the current figures.
The three ways to pay
Clipper
Clipper is the regional fare card for the Bay Area. It works on Muni, BART, Caltrain, ferries and other agencies, and the airport's ground transportation page describes it as the card used on 24 Bay Area systems. A visitor can buy a card, load value and tap it at the reader on a bus or at a fare gate. Clipper also comes as a card in a phone's wallet, depending on the phone. The SFMTA fare page notes that a discount applies to the Muni fare when you transfer to Muni from a connecting agency within two hours of your first trip.
For a visitor staying several days and riding more than one system, the plain advice is to get a Clipper card, or the phone version, before the first ride. It works everywhere.
Contactless credit and debit cards
Muni takes tap-to-pay from chip-enabled credit and debit cards. According to the SFMTA fare page, a touchless card can pay the adult single ride fare, with the service starting in December 2025. BART's "Tap and Ride" lets riders use contactless cards and phones at its fare gates, as the airport's transit page describes. For a visitor with a contactless card, that can mean buying nothing at all.
Two cautions. First, a contactless card pays the standard single-ride fare, and passes, discounts and the visitor passport are tied to Clipper or the app. A tourist who rides many times a day may do better with a pass. Second, use the same card each time you board, because a different card or a phone wallet may be treated as a separate payment; the SFMTA page explains how its system handles transfers.
MuniMobile and cash
MuniMobile is the SFMTA's phone app for buying Muni tickets and passes. One change is worth noting: the SFMTA says Single Ride Passes will no longer be sold on MuniMobile starting September 1, 2026. Passes, including day passes and visitor passports, remain available through the app and Clipper, and the app works without a Clipper card.
Cash is accepted on vehicles, with exact change required. The ticket machines at Muni Metro stations do not give change; they issue a voucher for the balance. Cash fares run higher than fares paid with Clipper, tap-to-pay or the app, a gap the agency has used to nudge people toward electronic payment.
What the ticket gets you
A Muni single ride is good for 120 minutes of travel. In that window a rider can transfer between Muni vehicles without paying again, so a short trip with a change from a bus to the Muni Metro costs one fare. The cable cars are a separate system with their own, higher fare, because they are a tourist attraction as well as transit; a regular ticket is not good on them unless it is a pass that includes them (riding the cable cars).
Day passes and visitor passports
The SFMTA sells day passes, and its visitor passports cover Muni buses, Metro, historic streetcars and cable cars for one, three or seven days. A passport that includes the cable car is usually the better value for a visitor planning several rides, and a day pass is simpler for a day on the bus and Metro. The prices are under review, so this guide does not list them; the SFMTA's fares page shows the current options for each (How to ride Muni).
Who rides free or for less
The rules for children and seniors matter most to a family:
- Youth 18 and under ride regular Muni free, with the cable car as the exception.
- Children 4 and under ride the cable car free.
- Seniors and people with disabilities pay a lower fare, and eligible low-to-moderate-income seniors and people with disabilities have a free Muni program through Clipper.
- Clipper START, a discount program, halves the fare for eligible limited-income riders.
For a visitor with children, the youth rule can save real money. A family of four with two teenagers pays for two adult fares, and the youth ride Muni for nothing, though the cable car still charges (Visiting San Francisco with kids).
What a fare buys: Muni at a glance
Knowing what the system includes helps a visitor decide what to pay for. SFMTA's route list shows 73 entries, and the same fare logic covers them:
- Muni Metro, the light-rail and streetcar network, with the F Market and Wharves, J Church, K Ingleside, L Taraval, M Ocean View, N Judah and T Third Street lines, plus shuttle services. The N Judah runs from the ocean to the ballpark, and the T Third runs through the Central Subway from Chinatown to Sunnydale (Riding the N Judah from the ocean to the ballpark, The T Third and the Central Subway).
- Buses and trolley coaches, with numbered routes such as the 1 California, 5 Fulton, 14 Mission, 19 Polk, 22 Fillmore, 30 Stockton, 38 Geary and 49 Van Ness/Mission.
- The three cable car lines, California, Powell-Hyde and Powell-Mason, which are priced separately.
- Owl routes and the 714 BART Early Bird, for late-night and early-morning travel when the main network is quiet.
The practical point: one fare covers all of the regular network for 120 minutes. A visitor does not need a separate ticket for the Metro and the bus, and a trip with a change is one payment.
Help, languages and accessibility
Fare questions can go to the SFMTA's customer service center at 11 South Van Ness Avenue, to the agency's website or to 311, which runs 24 hours a day and serves callers in over 160 languages. From outside the city, 311 is reached at 415-701-2311 (from a 311 call to a cleaned street). The agency posts live service alerts on its website, and they are worth a look before a trip, since a closed line or a diversion changes the route.
Riders who use wheelchairs or have other accessibility needs should check the SFMTA's accessibility information. The Muni Metro platforms and the buses have different boarding arrangements, and the historic streetcars and cable cars are less accessible than modern vehicles. The agency lists which stops and stations are accessible.
Why the fare system matters to the city
Fares are only part of what pays for Muni. The fare table is set through the SFMTA's budget process and can change; the agency's own fare page is the authority on current prices. A visitor planning a trip in 2027 should check the page again before departing, since a table that is accurate in November 2026 may have moved (How Muni fares work in 2026).
Proof of payment
Muni runs on proof of payment: after you pay, keep your ticket, pass, app screen or Clipper card with you for the length of the trip. Fare inspectors can check on vehicles and in stations, and a rider who cannot show proof of payment may receive a fare ticket. For tap-to-pay that means keeping the card you tapped, and for the app, an active ticket on your screen (Proof of payment on Muni).
BART, Caltrain and the airport
BART plays by different rules: you pay at the gate to enter and exit, based on distance. Clipper cards and contactless cards work at the gates, and BART runs from downtown San Francisco to the airport, where a station sits in the terminal complex, as well as under the bay to Oakland and Berkeley (BART from the Transbay Tube to SFO). Caltrain, which runs south from 4th and King, accepts Clipper and offers a discount program for eligible riders, and its fares depend on the zones traveled; the Caltrain website lists them (Using BART and Caltrain from San Francisco).
For a visitor landing at SFO, the usual route is BART to the city, with a card or phone ready. The airport also lists rideshare, taxi and autonomous-vehicle pickups as separate options, and the airport's ground transportation pages explain each (Getting from SFO to the city, San Francisco International Airport). The airport is operated by the city but sits in San Mateo County, so its transit connections cross the line between agencies, which is why Clipper is useful.
A sample plan for a three-day visit
- Before you arrive, decide between Clipper and a tap-to-pay card. If you will use BART, Muni and a ferry or Caltrain, choose Clipper.
- At the airport, buy or load a card and ride BART to the city.
- Day one, use the card on Muni to reach Fisherman's Wharf and the cable car, or buy a visitor passport that covers the cable cars.
- Day two, a day pass for the bus and Metro works for a trip to Golden Gate Park and back.
- Day three, if you plan a Caltrain or ferry trip, use the same Clipper card for those.
Common mistakes
- Paying cash on the bus without exact change.
- Forgetting that BART charges by distance and expects a tap at both the entry and exit gates.
- Assuming a regular ticket covers the cable car.
- Using two different cards for the same trip.
- Throwing the ticket away before the end of the ride.
The SFMTA's own pages and the 311 line, which answers in more than 160 languages, can settle questions about fares (San Francisco Municipal Transportation Agency).