Guides

Using BART and Caltrain from San Francisco

How to use BART's Market Street stations and Caltrain's San Francisco terminal at 4th and King, with Clipper and tap-to-pay, and how each connects to Muni.

San Francisco's two regional rail systems leave the city in different directions and from different parts of town. BART runs under Market Street and fans out to the East Bay and down the Peninsula, with a station at the airport. Caltrain starts at a terminal in the South Beach area and runs south down the Peninsula to San Jose. Neither one is run by the city, and neither uses Muni's fare, but both connect to Muni and both take the same Clipper card.

BART: under Market Street and out

BART opened its first service on September 11, 1972, and passengers began riding through the Transbay Tube between San Francisco and Oakland on September 16, 1974. In San Francisco the trains run through stations beneath Market Street and then southwest through the Mission and Glen Park.

The stations you will use most:

  • Embarcadero, Montgomery, Powell and Civic Center. These four are shared stations with Muni Metro, so you can change between a BART train and a J Church, K Ingleside, L Taraval, M Ocean View or N Judah train inside the same station. Embarcadero is the stop for the Ferry Building and the waterfront, Montgomery for the Financial District, Powell for Union Square and the Powell Street cable car turnaround, and Civic Center for City Hall, the Main Library and the Asian Art Museum (riding the cable cars).
  • 16th Street Mission and 24th Street Mission. The two stations for the Mission District.
  • Glen Park and Balboa Park. Glen Park serves the neighborhood of the same name, and Balboa Park serves the Ingleside and Excelsior area and connects to Muni Metro lines. Daly City, just south of the city line, is the station beyond.

From the city, trains continue to San Mateo County and the airport, and through the Transbay Tube to Oakland, Berkeley and the rest of the East Bay. For the airport, see Getting from SFO to the city.

Paying. BART's "Tap and Ride" lets you pay at the fare gate with a contactless bank card or a phone wallet, and Clipper works as well. Fares depend on the distance between stations, and BART publishes them at bart.gov; use its fare calculator with your two stations rather than relying on a number from a guide. In San Francisco you can enter with Clipper and ride to a Muni stop and transfer: the agency fare page lists a $2.85 discount on an adult Muni fare if you transfer to Muni from a connecting agency within two hours of the first trip.

When it runs. BART is not a 24-hour system. It closes overnight and opens early in the morning, with weekday service starting earlier than weekend service; the posted hours at bart.gov show the first and last train for your station. SFMTA's route list includes a 714 BART Early Bird bus for the early hours before trains start.

Alerts. Delays and station problems are posted on the BART advisories page, bart.gov/schedules/advisories. Check it before a trip that has a connection at the other end.

Caltrain: 4th and King and the Peninsula

Caltrain runs from San Francisco to San Jose along the western side of the bay. Its San Francisco terminal is at 4th and King Streets, in the South Beach neighborhood and a short walk from Oracle Park. That also puts it next to the Muni Metro's N Judah and T Third lines, which stop at the ballpark (South Beach and Rincon Hill). The train is the usual way for commuters to reach the Peninsula's Silicon Valley job centers and for fans to reach the ballpark from the south.

Paying. Clipper is not the only option. Caltrain accepts Clipper, in plastic or in a phone wallet, and contactless cards at its station validators. You tap on before boarding and you tap off at the end of the trip; the reader shows "Travel OK" when a tap has registered. At the San Francisco station the validators are on the concourse rather than on the platform, so tap before you walk out to the track. Forgetting to tap off can cause a maximum fare to be charged, according to Clipper's Caltrain guidance. Fares depend on the zones between stations; the current table is on caltrain.com, and Caltrain's customer line is 650-508-6200.

Reaching it. Muni's N Judah and T Third stop near the terminal.

On foot, the ballpark is a few minutes away (How to ride Muni).

Choosing between them

If you are going to... Use Why
Oakland, Berkeley or elsewhere in the East Bay BART The only rail crossing under the bay
SFO BART A station inside the International Terminal
Daly City or San Mateo County cities BART or Caltrain Depends on the town; check each station map
Palo Alto, Mountain View, San Jose Caltrain The Peninsula line to San Jose
A ballgame at Oracle Park Caltrain, N Judah or T Third All stop within a short walk

Practical notes

  • Pick the right exit. Market Street stations have long mezzanines and several exits; reading the street names on the signs before you climb saves a block of walking.
  • Check the last train. BART and Caltrain both stop for the night. If you are leaving a late event, look up the last departure before you leave.
  • Report problems. For a Muni problem near a station, the SF311 line and app take feedback on Muni service. BART and Caltrain have their own customer lines, and emergencies anywhere go to 911.

Salesforce Transit Center, which replaced the Transbay Terminal in 2018, is a bus terminal, so Caltrain's San Francisco station is still the one at 4th and King. For the agency that runs Muni and how it differs from BART, see San Francisco Municipal Transportation Agency.

Related city government

Latest on this topic