Blog

Building the Golden Gate Bridge, 1933 to 1937

Construction began January 5, 1933 and the bridge opened to walkers May 27, 1937. The bond vote, the safety net, the eleven deaths and the last rivet.

On Thursday, May 27, 1937, the Golden Gate Bridge opened to walkers. It had taken four years, four months and 22 days to build, the work had cost eleven men their lives, and the people of San Francisco and Marin County had voted to tax themselves to pay for it. According to the Golden Gate Bridge, Highway and Transportation District, the bridge came in ahead of schedule and under budget, and its main span of 4,200 feet was the longest of any suspension bridge in the world at the time. The dates behind that opening are worth following in order.

A strait and a ferry

The Golden Gate is the mile-wide channel at the mouth of the bay, and for decades the only way across was by water. The bridge district's timeline records that regular ferry service linked San Francisco and Sausalito in 1868. In 1869 Joshua Norton, the self-proclaimed emperor of San Francisco, first called publicly for bridges across the bay.

The engineer who made the case was Joseph B. Strauss, born in Cincinnati in January 1870, who in 1921 submitted preliminary sketches with a cost estimate of $27 million (sources give the figure variously from $17 million to $27 million). On August 15, 1929, he was appointed chief engineer of the project.

November 4, 1930: the bond vote

A bridge this size needed a new kind of government. A special district was formed to build and run it, and voters approved a $35 million bond issue on November 4, 1930. The vote was 145,657 in favor and 46,954 against, which works out to about 76 percent in favor.

On July 8, 1931, lump-sum bids showed that the project could be completed within the $35 million estimate. The record shows that the bridge was finished ahead of schedule and under budget.

January 5, 1933: construction begins

Construction officially started on January 5, 1933. The years that followed were years of foundations and towers: the south pier in the open water of the strait, the north and south anchorages on land, the two towers rising 746 feet above the water and the cables hanging between them. The bridge district's figures for the finished structure give a sense of the work:

Element Figure
Main span (between the towers) 4,200 feet
Total length, abutment to abutment 8,981 feet, about 1.7 miles
Height of towers above water 746 feet
Diameter of one main cable 36 3/8 inches
Length of one main cable 7,650 feet
Width of the bridge 90 feet
Clearance above mean higher high water 220 feet
Structural steel 83,000 tons
Concrete 389,000 cubic yards
Original weight of bridge, anchorages and approaches 894,500 tons

The two main towers alone weigh 44,000 tons, and both main cables, with their suspender cables and accessories, weigh 24,500 tons.

1936: the roadway and the net

The most dangerous part of the job was the suspended roadway. Construction of the main suspended structure began on June 18, 1936. On August 31, 1936, a safety net was placed under the construction zone. The net would prove its worth.

Eleven men died building the bridge. The first to die was Kermit Moore, killed on October 21, 1936, when a traveling derrick toppled. The other ten died on a single day, February 17, 1937, when a scaffold fell into the net. A committee investigating the accident criticized Strauss on March 14, 1937; the bridge district's timeline notes he was reported to receive $1,000,000 for his services.

On November 20, 1936, the two sections of the main span were joined, bringing the roadway together over the middle of the channel.

April 27, 1937: the last rivet

The Last Rivet Ceremony took place at midspan on April 27, 1937. Edward "Iron Horse" Stanley drove the final rivet.

May 27 and 28, 1937: the opening

The bridge opened first to pedestrians on May 27, 1937. Walkers were allowed to cross for the day before any vehicles, and the Library of Congress records the date as the day the bridge opened. The next day, May 28, the bridge opened to vehicles at noon, when President Franklin D. Roosevelt pressed a telegraph key in the White House to signal the opening.

The opening came six months and fifteen days after the Bay Bridge's opening on November 12, 1936, a story told in The Bay Bridge opens, 1936. The earlier bridge connected San Francisco to the East Bay, the later one to Marin County and the North Bay.

The bridge in numbers: a little arithmetic

Three calculations put the figures in perspective.

  • Construction time. January 5, 1933 to May 27, 1937 is four years, four months and 22 days, or about 1,600 days.
  • Support. Of the voters who cast ballots on the bond, 145,657 of 192,611 voted yes, or about 76 percent.
  • Length. The bridge's 8,981 feet is 1.7 miles, and its main span is more than three-quarters of a mile.

Sixty-eight years from idea to bridge

The stretch between the first call for a bridge and the opening is a long one. Joshua Norton's first public call came in 1869, and the bridge opened in 1937, 68 years later. Strauss's sketches came 52 years after Norton's call and 16 years before the opening. The bond vote came seven years before the opening, and construction began a little over two years after the vote, on January 5, 1933. The actual building, four years and four months, was the shortest phase of the whole story.

The strait had been guarded long before it was bridged. The Spanish built the Castillo de San Joaquin on the northernmost headland of the peninsula, finished on December 8, 1794, a site that later became Fort Point. The founding of Mission Dolores and the Presidio, 1776 tells the story of that earlier fortification.

What the numbers say about the structure

The bridge district's weights show how heavy the structure is and how it has changed. The original combined weight of the bridge, anchorages and approaches was 894,500 tons. By 1986 the combined weight was 887,000 tons, about 7,500 tons less, a reduction of less than one percent. The two towers account for 44,000 tons, and the two main cables with their suspender cables and accessories for 24,500 tons. The structural steel in the whole bridge came to 83,000 tons, and the concrete, in the anchorages, piers and approaches, to 389,000 cubic yards.

The cables are the best way to grasp the scale. Each of the two main cables is 36 3/8 inches in diameter, including the exterior wrapping, and 7,650 feet long, nearly a mile and a half. Each hangs from the tops of towers that stand 746 feet above the water, and the roadway hangs from the cables 220 feet above mean higher high water, high enough for large ships to pass beneath.

The district that built it, and still runs it

The Golden Gate Bridge, Highway and Transportation District, the agency created to build the bridge, still owns and operates it. It is a regional body that crosses county lines and is separate from the City and County of San Francisco, as the City Attorney's list of multi-county agencies shows. The district also runs the Golden Gate Ferry, and its site, goldengate.org, carries the current rules for crossing on foot, by bicycle and by car. Why San Francisco is both a city and a county explains how regional bodies like it sit alongside the city's own government.

Why the opening day matters

The pedestrian day on May 27 was the first time ordinary people could walk the roadway, and the next day's opening to vehicles at noon, signaled from Washington by the President, made the bridge a working part of the highway system. US 101 crosses the bridge, and the highway's path through the city is the subject of US 101 through San Francisco. Today the bridge carries commuters, cyclists, walkers and visitors across a strait that for centuries was crossed only by water.

Reading the bridge today

A visitor can cross the bridge on foot or by bicycle and look up at the towers from the Presidio side. The bridge district runs the bridge, and it posts current information for pedestrians, cyclists and drivers at its own site. The Golden Gate Bridge on foot and by car describes the crossing, and Presidio and Marina describe the areas nearest its southern end. The bridge's vantage points are among the most photographed places in the city, and Free things to do in San Francisco lists several free ways to see it.

The district's history pages, at goldengate.org, give the full set of dates for the bridge, from the first ferry to the opening.

A timeline

Date Event
1868 Regular ferry service links San Francisco and Sausalito
1869 Joshua Norton first calls for bridges across the bay
1921 Strauss submits preliminary sketches
August 15, 1929 Strauss appointed chief engineer
November 4, 1930 Voters approve a $35 million bond issue, 145,657 to 46,954
July 8, 1931 Bids show the project can be built within $35 million
January 5, 1933 Construction begins
June 18, 1936 Construction of the main suspended structure begins
August 31, 1936 Safety net added
October 21, 1936 First death: Kermit Moore
November 20, 1936 Main span sections joined
February 17, 1937 Ten men die when a scaffold falls into the net
April 27, 1937 Last rivet
May 27, 1937 Bridge opens to pedestrians
May 28, 1937 Bridge opens to vehicles at noon

Related guides

Related neighborhoods

Latest on this topic